| Model Number |
Type |
Specs. |
 |
P-2021 End-of-Line Ionizer
The model P-2021 is a simple, reliable, efficient and effective means of eliminating static in a variety of industries, including electronics, optics, graphics and finishing. Easy to install on any clean, dry compressed air
or inert gas line, the P-2021 emits a powerful stream of ions to quickly neutralize electrostatic charges. By design, the P-2021 never goes out
of balance, so it does not require periodic calibration. In addition, it requires no electrical power to operate, so it’s intrinsically safe for use in flammable or explosive environments.
|
 |
P-2021
|
Learn more about the P-2021 End of Line Ionizer |
 |
P-2031 End-of-Line Device
The model P-2031 is designed to deliver high volumes of ionized compressed gases at low pressure. Similar to the P-2021, it is easily installed on any clean, dry compressed air or inert gas line. As the compressed gas passes through the device, it is ionized and does not require a specific distance from the affected surface to achieve proper ion intermix. The P-2031 always produces a balanced ion output down to zero volts. The P-2031 is ideally suited for removing static charges in storage containers and hoppers, such as those used in the recycling of plastic scrap or pelletizers where a large area of coverage is required.
|
|
P-2031
|
Learn more about the P-2031 End of Line Ionizer |
 |
P-2035 End-of-Line ionizer
The NRD Nuclecel™ Ion Air Source Model P-2035 produces balanced ionization to effectively eliminate static charges on a wide range of products. It can be used with air or inert gases. Depending on the source of air flow and how it is regulated, Model P-2035 can be adjusted to produce a flow of ions strong enough to remove dust and static charges at distances of several feet.
|
|
| P-2035 |
Learn more about the P-2035 End of Line Ionizer |
 |
P-2063 Alpha End Of Line Ionizer
Utilizing proprietary alpha ionization technology to produce balanced static control down to zero volts is the model P-2063. Its large 4.5" diameter opening allows for high air volume to pass through the ionizer. The model P-2063 was designed for use with the model 4064-1200, but can be used with any clean, dry air sources such as a flex hose with remote blower to remove static in a wide range of applications.
|
|
P-2063
|
Learn more about the P-2063 End of Line Ionizer |
NRD, a Mark-IV company, has over 40 years of experience in the design and manufacture of ionization sources and related products. Established in 1969, NRD has developed innovative processes to not only harness the unique capabilities of Alpha and Beta emitters, but has incorporated those attributes into a wide array of industrial products, related to life safety, chemical detection, and static neutralization.
Contact Transforming Technology today for any ESD equipment you may need.
Transforming Technologies, LLC
3719 King Rd.
Toledo, OH 43617
(419)841-9552
(419)841-3241 fax
|
