product specials request quote esd reasources blog about contact

Browse By Categories



Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Sign up for our Email Newsletter
For Email Marketing you can trust

email us link

Static Control Products - Ground Accessories

How to Install Grounding Snaps into ESD Material




Grounding snaps are used to connect a ground cord to a work surface static safe mat or a ESD floor mat. An antistatic floor mat or ground mat is one of a number of antistatic devices designed to help eliminate static electricity. It does this by having a conductive material embedded within the mat that collects the static. The mat would need to be grounded (earthed). This is usually accomplished by plugging into the grounded line in an electrical outlet.Pronged Push and Clinch snaps are ideal for multi-layered surfaces and come as a male stud or female socket and are offered in 10 mm (3/8”) size.
Download How to Install Ground Snaps.



Push and Clinch ESD Ground Snaps
Push and Clinch Grounding Snaps: CS1010

Snap Installation:

1. Place ESD matting on workstation. Locate the safest grounding point (outlet).
2. Choose which side of the mat has the closest or most convenient access to the grounding point.
3. Locate an area 1 –2 inches in from each corner of the mat on the side that was determined above.
4. Press snap downward until prongs puncture matting and are fully visible on the underside of the mat.
5. Bend the prongs of the snaps until flush against the underside of the mat.

6. Add additional snaps -for a total of at least two- every 10 feet or the length the mat allows.

install ground snaps


About Us | ESD Accessories | Coil Cords | Conductive Tape | Constant Monitors | FAQ | Field Service Kits
Floor Mats | Mats | Glossary | Gloves | Heel Grounders | Ionizers | New Products | Product Line | Sheet Protectors
Specials | SMD Storage Boxes | Test Equipment | Tool Carriers | Warranty | Wipers | Wrist Straps | Contact Us | Site Map

email us link