Static Control Products - ESD Floor Mats

VinylStat FM3: ESD Non-Slip Floor Runners - V-Groove Texture

Description

Corrugated floor runner mats can reduce slips and falls by increasing traction, even when exposed to moisture and chemicals. Transforming Technologies' VinylStat FM3 V-Groove solid floor runners are made from a homogeneous polymer mix of durable PVC and are designed to provide a static safe work area for a wide variety of applications where ESD properties are required.

The FM3's matting is embossed with a V-Groove pattern thats provides a non-slip surface that is easy to clean and has great lay-flat properties. Available only in Gray. Full rolls are available in the sizes: 3' x 60' and 4' x 60'. Cut mats are also available in a varity of sizes and come ready to use with factory installed grounding snaps and low profile grounding cord. FM3 is permanently static dissipative.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD 4.1.

Request Quote

VinylStat FM3 ESD Floor Runners

Documents

VinylStat FM3 ESD Floor Runners Spec.

Model Number	Description
Floor Mats - All floor mats come ready to use with two factory installed snap fasteners and Transforming Technologies' Low Profile FM1515 ground cord
FM3 3648	Floor Runner - 36" x 48" (3' x 4') -Floor Mat, Gray, Grounding Hardware
FM3 3660	Floor Runner - 36" x 60" (3' x 5') -Floor Mat, Gray, Grounding Hardware
FM3 3672	Floor Runner - 36" x 72" (3' x 6') -Floor Mat, Gray, Grounding Hardware
FM3 4860	Floor Runner - 48" x 60" (4' x 5') -Floor Mat, Gray, Grounding Hardware
FM3 4872	Floor Runner - 48" x 72" (4' x 6') -Floor Mat, Gray, Grounding Hardware
FM3 4884	Floor Runner - 48" x 84" (4' x 7') -Floor Mat, Gray, Grounding Hardware
Full Rolls
FM3 3672GY	Floor Rubber - 36" x 60' - Full roll, Gray
FM3 4872GY	Floor Rubber - 48" x 60' - Full roll, Gray

Specifications
Physical Properties	Typical Value
Color	Gray
Emboss Pattern	V-Groove
Gauge	0.125"
Density	20 lb/ft3 nominal
Tensile	700 lb/in minimum
Elongation	150% minimum
Tear	150 lb/in minimum
Durometer	80+ 5, Shore A
Electrical Properties	1.08 - 9 x109Ω/sq
Suggested Service Temp	-20o F to + 160o F (2)

Grounding Hardware Included with mats
	Floor Mat Ground 15' straight cord with a 1Meg resistor. Molded low profile head to reduce potential trip hazards. 1/8" ring terminal to attach to grounding point.
FM1515
	CS Series Grounding Snaps Provides a point on the mat to attached a ground cord. Male or female snap.
CS1010

Transforming Technologies, LLC
3719 King Rd.
Toledo, OH 43560
(419)841-9552
(419)841-3241 fax

Toledo Ohio Web Site Design By Webcasters.com
Copyright 2008 Transforming Technologies & Ohio Media, Inc.